Magnum Me-bmk Battery Monitor State Of Charge With Shunt

Magnum Me-bmk Battery Monitor State Of Charge With ShuntMonitoring your battery bank is easy with the Battery Monitor Kit (ME BMK)* from Magnum Energy. Acting as a ? fuel gauge? for your batteries, the ME BMK monitors their state of charge (SOC) and then provides this information in an easy to understand display via the ME RC remote. With accurate SOC readings, you can avoid unneccessary battery recharging, saving on fuel and long term maintenance costs. If you already have a Magnum Inverter Charger and

Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK)* from Magnum Energy. Acting as a ?fuel gauge? for your batteries, the ME-BMK monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-RC remote. With accurate SOC readings, you can avoid unneccessary battery recharging, saving on fuel and long-term maintenance costs.

If you already have a Magnum Inverter/Charger and Magnum Remote*, the ME-BMK is an easy retrofit. Simply install the kit according to the installation manual and begin monitoring your battery bank via the ?Meter? button on your ME-RC.

Available readings from the ME-BMK

• State of Charge (SOC)

• 0 - 100%

• DC volts

• DC amps

• Amp hours in/out

• Resettable amp hours out

• Total amp hours out

• Minimum volts DC

• Maximum volts DC

• Temperature compensated

• Auto detects input voltage

ME-BMK

DC volts 7 to 70 (±0.5%) auto voltage detection

DC amps ±0.1 to 999 (±1.0%)

Battery SOC % 0 to 100% (1% increments)

Power draw < .6 watts

Amp hours in/out ±32,768 amp hours (1 AH increments)

rAH out (resettable amp hours removed) 0 to 65,353 amp hours, resettable (0.1 AH increments)

tAH out (total amp hours removed) 0 to 65,535,000 amp hours (0.1 k or 100 AH increments)

Minimum/maximim DC 7 to 70 VDC, resettable

Shipping weight 2 lb (.9 kg)

Kit includes Manual, sense module, DC shunt, twisted pair wire, and communication cable

Sense wire Twisted pair ?blue & orange, 5? length, 18 AWG wire

Communication cable 2-conductor, 10? twisted pair, telephone standard

Remote requirements Use with an ME-RC with firmware revision of 2.0 or higher

DC Shunt

Resistance 0.1 milliohm (500A at 50mV)

Continuous current 410 amperes maximum

Overload current Overloads to 500 amps for less than 5 minutes if normally operated at less than 300 amps